点击图片查看大图
Tulsion®T-52H 特别适用于水处理，并且适合于在广泛的PH范围和高温条件下工作。
典型特性（TYPICAL CHARACTERISTICS）： Tulsion® T-52 H
型式/Type 强酸性阳离子交换树脂/Strong acid cation exchange resin
主体结构/Matrix structure 交联共聚物/Cross1inked copolymer
官能基/Functional grou 核子磺酸基/Nuclear sulphonic
物理型式/Physical form 琥珀色球状/Amber colored moist beads
离子型式/Ionic form 氢/Hydrogen
粒径分布/Particle size distributio 0.3 to 1.2
均粒系数/Uniformity Coefficient 1.7 max
总交换量/Total exchange capacity 1.9 meq/ml (min)
湿度/Moisture content 48±3%
反洗调节密度/Backwash settled density 830 to 860 g/ lit
允许温度/Temperature Stability 120℃
PH范围/PH range 0 - 14
溶解性/Solubility 不溶/Insoluble in all common solvent
操作条件特性（TYPICAL OPERATING CONDITIONSTulsion® T-5201 H
最大操作温度/ Max Operating temperature 120℃
in bed depth 600 mm
最大流速/Maximum service flow 120 m³/hr/m³
逆洗膨胀空间/Backwash expansio ace 40 - 75%
逆洗流速/Backwash flow 9 - 20 m³/hr/m³
再生剂/Regenerant HCl/ H2SO4 for H+型/ NaCl for Na+型
再生程度/Regenerantion level H+型：30 - 60 g HCl/l，40 - 250 g/l H2SO4
Na+型： 60 - 160 NaCl g/l
再生剂浓度/Regenerant concentratio 3-4% HCl，1.5-5% H2SO4，10-15% NaCl
再生流速/Regenerant flow rate 2- 16 m³/hr/m³
再生时间/Regenerant time 20- 60 min
冲洗流速/Rinse flow rate：慢/Slow 再生流速/At regeneration flow rate
快/Fast 工作流速
冲洗量/Rinse Volume 3- 5 m³/m³
测试（TESTING）： Tulsion® T-5201 H
离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - 7330，1998.
包装（PACKING）： Tulsion® T-5201 H
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:：17090831380
